Krazy Kiley's

CP2 (B)
(Receivers and Amplifiers - Phono Pre-Amplifier)

The CP2 works with all turntables, whichever type of cartridge they use. Like the CP1 it works with popular Moving Magnet cartridges. But it also works with Moving Coil cartridges found in the highest-end audiophile turntables offering even more accuracy and detail than Moving Magnet. Even if your amplifier does have a built-in phono stage, it's well worth bypassing it using the CP2 to deliver much greater depth and detail.

Ask an Expert


Audio circuitry has been refined with multiple transistors wired in parallel ensuring the lowest possible distortion and noise. A copper shield provides further protection to this extremely sensitive part of the circuitry, limiting the noise that can be injected into the signal. This is especially important with a Moving Coil cartridge because its signal is even quieter and more delicate than Moving Magnet, so it needs even more amplification.


High-spec multi-parallel capacitors achieve exceptional RIAA accuracy - the industry standard for reproducing vinyl recordings. A highly accurate, subsonic filter also removes the common problem of unwanted low-frequencies that are inaudible but can damage subwoofers.

IMPORTANT: Images may not reflect actual product.
Sound channels Mono
Power consumption (max) 5 W
Total harmonic distortion 0.009 %
Frequency range (Hz) 20 Hz - 20,000 Hz
Additional information • Phono pre-amplifier with moving magnet (MM) and moving coil (MC) input stages
• Discrete transistors for the all-important input stages instead of the more common integrated circuits
• Balance control for fine correction of cartridge imbalance
• Acoustically damped full metal chassis with thick brushed aluminium front panel
Composites Audio Inputs (Analog) 2
Composites Audio Outputs (Analog) 1
Width 8.5 inch(es) / 21.59 cm
Height 1.8 inch(es) / 4.57 cm
Depth 5.2 inch(es) / 13.21 cm
Weight 2.01 lb(s) / 0.91 kg

Sign up Get access to our best deals by signing up to receive our special offers!