Loading...
j2 1000.1 Car Stereo Amplifiers
Store only
The J2 1000.1 mono amp sends massive power safely to low-impedance loads, delivering up to 1,000 watts RMS at 1 ohm, so it's a great candidate for powering almost any bass system. The low-pass filter and bass boost allow you to get maximum bottom-end punch from your enclosure in your vehicle, while the included wired remote lets you tweak the amplifier's level from the comfort of your front seat.
Specifications
Specifications
| Total max power | NA |
| RMS power output | 1000 W |
| Amplifier class | D |
| Number of channels | 1 |
| Load impedance capability | 1 ohm |
| 4 ohm output power | 400 W |
| 2 ohm output power | 700 W |
| 1 ohm output power | 1000 W |
| Frequency response | 10 Hz - 160 Hz +/- 0.5 dB Hz |
| Total harmonic distortion and Frequency Range | 1% at 4 ohms |
I/O
| RCA inputs | Yes |
| RCA outputs | Yes |
| Speaker level inputs | No |
| High-pass filters | NA |
| Low-pass filters | Yes |
| Cut-off frequencies (HP/LP filters) | 40-300 |
| Subsonic filter | NA |
| Cut-off frequency (subsonic filter) | NA |
Size
| Width | 37.1 cm |
| Length | 24.4 cm |
| Height | 5.5 cm |
Dimensions
| Shipping Weight | NA |
Warranty
| Warranty | NA |
UPC
| UPC# | NA |
